IKO CF8FBUUR Cam Follower and Track Roller - Stud Type

Oil Speed Rating n2:18000 rpm; Basic Static Radial Load Rating Co:6550 N; D:47.0000 mm; d:20.000 mm; B:14.00 mm; Accessories:Snap-Ring; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:15000 rpm; Oil Speed Rating Open/Shielded n2:18000 rpm; Grease Speed Rating n1:15000 rpm;

Thrust factor K:1.61; B:479.425 mm; D1 ≈:735 mm; Comparative radial load rating CF:2550 kN; r1,2 min.:3.3 mm; Comparative axial load rating CFa:457 kN; Fatigue load limit Pu:1900 kN; Mass bearing:695 kg; r3,4 min.:6.4 mm; Basic static load rating C0:27500 kN;

R1:53.975 mm; Housing:SSAFS 517; Da:150 mm; Bearing:22217 EK; P90°:47.2 kN; PG:1/8 NPT; Pa:9.25 kN; End plug (suffix Y):EPR 9; P150°:26.7 kN; Mass pillow block:24.9 kg;

P90°:84.5 kN; H1:114.3 mm; Cap bolt:5/8-11 UNC; Bearing:23024 CCK/W33; Cap bolt, SAE grade:8; R2:30.163 mm; A2:222.25 mm; H:222.25 mm; Taconite seal:TER 113; Da:180 mm;

Mass bearing:231 kg; D:660.4 mm; d:292.1 mm; Limiting speed:500 r/min; Industry reference:T11500; Fatigue load limit Pu:1860 kN; r3,4 min.:10 mm; Dynamic load rating C90:2851 kN; B:43 mm; Dynamic load rating C1:10995 kN;

Mass needle roller and cage assembly:0.065 kg; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 25x35x4; Reference speed:15000 r/min; Limiting speed:17000 r/min; Ew:35 mm; U:30 mm; Fw:25 mm; Designation associated G design radial shaft seal with a low cross-sec

Recommended tightening torque for grub screw:4 N·m; A1:15 mm; A5:18.5 mm; A3:3.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Thread grub screw G2:M6x0.75; s1:26.6 mm; Recommended diameter for attachment bolts, mm G:10 mm; Bearing:YELAG 204; End cover:ECY 204;

P180°:450 kN; Housing:FSNL 526 RU; Appropriate attachment bolt, size G:20 mm; Ca:90 mm; P55°:900 kN; Oil level, min.:52 mm; Q180°:450 kN; Cap bolt, rec. tightening torque:350 N·m; A1:130 mm; P0°:900 kN;

Ca:55.804 mm; H:222.25 mm; R2:30.163 mm; Bearing:23024 CCK/W33; ba:46.831 mm; P180°:57.4 kN; Mass pillow block:39.5 kg; PosiTrac Plus contact element:2 x B10724-113; Cap bolt:5/8-11 UNC; Cap bolt, SAE grade:8;

Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:276000 N; Oil Speed Rating n2:3000 rpm; Basic Static Radial Load Rating Co:300000 N; d:95.000 mm; Grease Speed Rating n1:2000 rpm; B:90.00 mm; D:200.0000 mm; Fillet Radius ra:2.50 mm;

A2:193.675 mm; Mass pillow block:92.5 kg; Bearing:22228 CCK/W33; Da:250 mm; End plug (suffix Y):EPR 27; Housing:SAFS 528; Cap bolt recommended tightening torque:813.5 N·m; Appropriate attachment bolt size G:1 in; H2:60.325 mm; Pa:28.5 kN;

d:15.000 mm; Oil Speed Rating n2:24000 rpm; Basic Static Radial Load Rating Co:4250 N; Basic Dynamic Radial Load Rating C:8840 N; D:35.0000 mm; Fillet Radius ra:0.64 mm; B:11.00 mm; Grease Speed Rating n1:17000 rpm;

D:460.0000 mm; Basic Dynamic Radial Load Rating C:358000 N; d:300.000 mm; Basic Static Radial Load Rating Co:500000 N; Oil Speed Rating Open/Shielded n2:1500 rpm; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:780 rpm; Fillet Radius ra:3.00 mm; Grease Speed Rating Open/Shielded n1:1200 rpm

Mass pillow block:60.8 kg; Ca:73.787 mm; dc:125.412 mm; J min.:371.475 mm; P180°:84.5 kN; H1:152.4 mm; Initial grease fill:765.45 g; Bearing:22226 E; Labyrinth ring (dc shaft position):LOR 122; PosiTrac Plus contact element (db shaft position):B10724-134;

D:215 mm; Grease:1020 kN; Oil:106.560 kN; Dynamic (Cr):4.5 mm; with tapered bore:1 900 min-1; Pu:678 kN; with cylindrical bore:1 500 min-1; Static (Cor):8.3 mm; B:76 mm; rs (min):2.1 mm;