Mounted Units & Inserts

Contact Now

Mounted bearings, sometimes called bearing units or bearing blocks, have a bearing installed in a housing to ease installation and provide additional support for the bearing. They are face or surface mounted in applications where the shaft is perpendicular to the unit. Bearing inserts are used to replace worn or damaged bearings in an existing bearing housing. Collar bearings support high axial loads and limit radial movement. Flanges help ensure that the bearing is flush and provides added rigidity. Pillow-block (Plummer block) bearings attach to a vertical or horizontal surface to support rotating shafts and with light to moderate loads, such as in conveying and other operations where the shaft passes through the bearing. Take up bearings are used to align track and tension conveyor belts.

Bearing Number	Bore Dia	Outer DIa	Width	Size
DODGE HS-TB-SC-204 Mounted Units & Inserts	64 mm	0.27 kg	3800 r/min	7.8 kN
DODGE HS-F4B-SC-208 Mounted Units & Inserts	38.10 mm	5600 rpm	1.50 mm	One Seal
DODGE HS-F4B-SC-205 Mounted Units & Inserts	5730 lbf	1.46 lb	ZMaRC	1.3750 in
DODGE AN-GTM-12-203-D Mounted Units & Inserts	5.5 mm	3.3 mm	12.5 kN	20.301 mm
DODGE AN-GTM-08-107-D Mounted Units & Inserts	18 mm	20.1 mm	0.6 mm	2.8 mm
DODGE NO. 1000 TRAPEZOIDAL OIL RING Mounted Units & Inserts	6700 rpm	Two Shields	85.0000 mm	48800 N
DODGE NO. 708 TRAPEZOIDAL OIL RING Mounted Units & Inserts	0.0007 kg	5 mm	40000 r/min	2 kN
DODGE NO. 600 TRAPEZOIDAL OIL RING Mounted Units & Inserts	7000 rpm	62.0000 mm	30.000 mm	20400 N
DODGE AN-GT-04-20M-CR Mounted Units & Inserts	149.1 N·m	41.275 mm	2 x LOR 189	3/8 NPT
DODGE INS-GTM-65M Mounted Units & Inserts	0.36 kg	10.5 mm	56.4 mm	15.6 kN
DODGE INS-GTM-50M Mounted Units & Inserts	0.3 mm	35 mm	17 mm	40 mm
DODGE INS-GTM-45M Mounted Units & Inserts	163 mm	22.3 mm	680 mm	460 mm