Insert Bearings Spherical OD

Contact Now

National Precision offers a variety of insert bearings that can be used in numerous applications. Bearing inserts are used to replace worn or damaged bearings in an existing bearing housing without needing to repurchase a new mounted housing. In some cases, the mounted unit does not need to be removed from mounted surface. Insert bearings are designed to be mounted on shafts without using lock nuts, adapters, or shoulders. The inner ring of the insert bearing frequently extends outside of both sides of the housing to provide extra support to the shaft. Typically, these bearings come pre-lubricated with a multi-purpose lithium based grease, and allow for re-lubrication. Insert bearings are also available in free spinning design and a black oxide finish upon request. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

Bearing Number	Bore Dia	Outer DIa	Width	Size
AMI UG206-20 Insert Bearings Spherical OD	20.00 mm	100.000 mm	42300 N	4500 rpm
AMI UG206-19 Insert Bearings Spherical OD	0.071 kg	39.6 kN	55 mm	13.4 kN
AMI UG206 Insert Bearings Spherical OD	62.89 mm	125.425 mm	244.475 mm	2 x LOR 557
AMI UG205-16 Insert Bearings Spherical OD	2	16300 kN	388 mm	1.76
AMI UG205-15 Insert Bearings Spherical OD	45.000 mm	4500 rpm	42.90 mm	No Shield, no Seal
NTN A-UC215-215D1 Insert Bearings Spherical OD	3000 rpm	4800 rpm	Two Seals	20300 N
65 mm x 120 mm x 68.3 mm SKF YAR 213-2F Insert Bearings Spherical OD	4 x 7/8-9 UNC	EPR 21	120.65 mm	173 kN
25 mm x 52 mm x 34.1 mm SKF YAR 205-2F Insert Bearings Spherical OD	5000 rpm	40.000 mm	90.0000 mm	Shield & Seal
60 mm x 110 mm x 65.1 mm SKF YAR 212-2F Insert Bearings Spherical OD	5 mm	1.1 mm	41.1 kN	59.6 mm
40 mm x 80 mm x 29.7 mm SKF YET 208 Insert Bearings Spherical OD	1.04	15.6 mm	59.6 mm	70 N
45 mm x 85 mm x 30.2 mm SKF YET 209 Insert Bearings Spherical OD	26 mm	188 mm	47.4 kg	1.9
34.925 mm x 72 mm x 42.9 mm SKF YAR 207-106-2F Insert Bearings Spherical OD	22.225 mm	44.45 mm	44.45 mm	105 kN